AFPM 모터기술 (Axial Flux Permanent Magnet Motor) > 회사소개 및 사업분야

본문 바로가기

사이트 내 전체검색

AFPM 모터기술 (Axial Flux Permanent Magnet Motor)

본문

 높은 효율의  eflow AX Drive 축방향 자속형 모터
   축방향 자속 모터의 핵심장점은 회전자가 방사형과 비교 고정자 내부나 외부가 아니라 축회전방향으로 회전하기 때문에 더 큰 직경을 갖는다는 것이다. 토크는 힘에 반지름을 곱한 것과 같습니다. Axial-flux 설계를 통해  더 높은 토크를 얻을 수 있 다. 이는 동일한 영구 자석 및 구리 권선 에 비해 더 많은 토크를 얻을 수 있음을 의미합니다. 축방향 자속 모터 설계의 이러한 측면은 일반적으로 기존 방사형 모터에 비해 30% 이상의  토크 밀도를 얻을수 있다.

그러나 eflow AX-Drive  모터 토폴로지는 고정자 요크도 제거하여 고정자 철 질량을 최대 80%까지 줄입니다. 이 혁신기술은  현재 1세대   시장 EV의 대부분 사용중인  방사형 전기 모터에 비해 30% 이상의 전력 밀도 이점과 50% 이상의 범위 장점을 보유하고 있다.

혁신적인   당사의 축방향 자속 전기 모터에는 독창적인 고정자 와 회전자 구조 입니다. AX-Drive  고정자 권선은 최소한의 애플리케이션 엔지니어링으로 설계된 각형형태로  대량 생산에 이상적으로 적합한 모듈구조로 구성.
 특징적으로  eflow AX-Drive는  축방향 자속 설계는 핵심에 효율성을 가지고 있어  수요처에  93% 이상의 효율성과 더 큰 효율성을 위한 혁신 기술방향을 제공합니다.

“eflow는 2015년 부터  축방향 자속형 특허기술 이전을 통해   AX-Drive 라는  모빌리티  엑츄에이트를  만드는  훨씬 더 좋은 방법을 보유했읍니다.  우리의  혁신기술력은  모듈형 고정자 와  비스듬한 구조 및 조각자석 회전자 를 적용하여   모터의 무게를 줄이는 동시에 토크, 전력 밀도, 효율성 및 제조 가능성을 혁신 할수 있읍니다. ​


 High efficiency eflow AX Drive axial flux motor

A key advantage of axial flux motors is that they have a larger diameter because the rotor rotates axially rather than inside or outside the radial and comparative stator. Torque is equal to force multiplied by radius. Axial-flux design allows for higher torque. This means you can get more torque compared to the same permanent magnet and copper winding. This aspect of axial flux motor design typically achieves torque densities of 30% or more compared to conventional radial motors.

 

However, the eflow AX-Drive motor topology also eliminates the stator yoke, reducing stator iron mass by up to 80%. This innovation has a power density advantage of over 30% and a range advantage of over 50% over the radial electric motors currently used in most of the first-generation market EVs.

 

Our innovative axial flux electric motors have a unique stator and rotor structure. AX-Drive stator windings have a modular structure ideally suited for mass production in a square shape designed with minimal application engineering.

Characteristically, eflow AX-Drive has efficiency at the core of axial magnetic flux design, providing customers with an innovative technology direction for greater efficiency and greater than 93% efficiency.

 

“Eflow has had a much better way of making a mobility actuator called AX-Drive through the transfer of patented axial flux type technology since 2015. Our innovative technology applies modular stator and bevel structure and engraving magnet rotor to reduce motor weight while innovating torque, power density, efficiency and manufacturability.



AXIAL FLUX PERMANENT MAGNET  MOTOR/ GENERATOR (AFPM)
     축형영구자석 (AFPM) 모터와 발전기 기술은 기존 기술에 비해 고출력/고효율/저소음/소형 화의
   혁신적인 기술입니다. 
 
Advantages of axial flux motor
Compact structure, especially short axial sizes.
Small volume
Low weight.
High torque density.
High power density.
Small end-winding.
Excellent cooling performance

   

 

   AFPM방식은 고정자와 회전자 사이의 흡인력의 방향이 기존의 모터 축을 기준으로 원주방향(Radial)  

  이라고 한다면, AFPM 모터 의 경우 축방향(Axial)이기 때문에 원주방향에 비해 보다 큰 토크를 출력하는 

   장점이 있습니다

info_axpm1.jpg

info_axpm2.jpg
 


  • (주)이플로우
  • 본사:경남 창원시 전기의길 10 (한국전기연구원내)
  • 연구소/생산장 : 경남 창원시 자유무역3길 180, 7호동 7층
  • Tel:070-4845-9304 [전화걸기]
  • Fax:050-7517-2077
  • Copyright ⓒ eflow.kr All right reserved.
PC 버전으로 보기